A building defect is a problem involving part of a building, such as its structure, waterproofing, façade, fire safety systems, services, materials or workmanship.
Building defects can be difficult for a strata community to deal with. A problem may involve waterproofing, a façade, structural elements, fire safety systems or external cladding. Once an issue is identified, owners and strata managers need to understand the problem, what needs to happen next and whether it could affect the building’s insurance.
Building Commission NSW’s 2025 research found that 53% of buildings had serious defects. The research covered NSW class 2 strata schemes of four storeys and above registered between July 2018 and June 2024, so the finding should not be read as an Australia-wide rate.
Building defects can include structural problems, failed waterproofing, façade issues, mechanical defects, faulty workmanship and defective materials. Some are easy to see. Others only become apparent after the building has been completed and occupied.
Some insurance policy wordings use the term "latent defect" to refer to a problem that could not be discovered or observed during normal use and maintenance. Definitions can differ between policies, so it is important to check the wording that applies to your building. Where the problem sits can also matter. A defect involving common property can impose different responsibilities than an issue within an individual lot. The rules also differ between states and territories.
Cladding forms part of the outside of a building. It can provide weather resistance, insulation or a finished appearance.
Not all cladding presents the same fire risk. The Victorian Building and Plumbing Commission notes that “Two types of particular note include aluminium composite panels (ACP) and expanded polystyrene (EPS).”
The type of cladding is only part of the picture. How and where it has been installed, as well as the building’s wider fire safety measures, can also matter. Typically, cladding will feature on balconies, awnings, around windows, main points of entry, and external walls. If you are unsure what has been installed, start with building records. Your owners corporation, strata manager or building manager may also have information about the materials used or previous assessments. If information about the building’s cladding cannot be located, you can source a cladding audit from a qualified fire engineer.
Finding a defect does not automatically tell you how an insurance claim will respond. Strata policies may treat faulty workmanship, defective materials, design problems, known defects and maintenance in different ways.
The cost of correcting the defective part itself may also be treated differently from damage the defect causes to other insured property. For example, a problem with waterproofing and water damage elsewhere in the building can raise separate questions for an insurer. The cause of the damage, policy wording, exclusions, excesses and circumstances of the claim all matter.
Known defects can also be relevant to insurance. Some policy wordings ask for information about structural or fire safety defects, combustible cladding and building rectification or fire orders. Your broker can help you understand what information an insurer may require.
A defect, resulting damage and a maintenance problem can be connected, but they are not necessarily the same thing.
A waterproofing problem, for example, may lead to repeated leaks. If the underlying issue is not repaired, further damage may occur. Corrosion, wear, and gradual deterioration can also develop over time. Regular inspections and timely repairs can help identify problems earlier and provide a record of what has been found and addressed. Insurance is only one part of the picture. Building maintenance and rectification still need to be managed separately.
Start by gathering the building records, inspection reports and any notices already issued. Get advice from an appropriate building, engineering or fire safety professional where needed. Keep records of inspections, recommendations and rectification work. If the issue may affect the building’s risk or an insurance claim, speak with your broker early.
Responsibilities also depend on where the building is located. In NSW, the NSW Government states: “The owners corporation plans and pays for repairs to common property, including fixing defects.” Other states and territories have their own strata and building requirements, so check the rules that apply where your property is located.
A building defect is a problem involving part of a building, such as its structure, waterproofing, façade, fire safety systems, services, materials or workmanship.
Some insurance policy wordings use latent defect to describe a problem that could not be discovered or observed during normal use and maintenance. The definition can vary, so check the wording that applies to your policy.
Combustible cladding can raise fire safety or compliance issues depending on the material, where it is installed and the building’s wider fire safety measures.
No. Having cladding on a building does not by itself mean the building is unsafe. The type of material, installation and other fire safety measures can all affect the level of risk.[2]
Start with building plans, permits and other available records. You can also speak with your owners corporation, strata manager or building manager.
Where information about the cladding cannot be located, you may choose to source a cladding audit from a qualified fire engineer.
Do not assume it will. The response depends on the cause, the policy wording, exclusions and the circumstances of the claim.
It may be, depending on the policy and circumstances. Some policy wordings distinguish between correcting the defective component itself and resulting damage to other insured property.
Known defects may be relevant to insurance arrangements or a claim. Speak with your broker about the information the insurer may require.
The NSW Government says the owners corporation plans and pays for repairs to common property, including fixing defects.[3]
Victorian guidance recommends speaking with the owners corporation or building manager first to check whether the building has been audited and what information is already available.[2]
No. Building, strata and cladding requirements differ between states and territories. Check the current requirements that apply where your building is located.
This website contains general information, does not take into account your individual objectives, financial situation or needs and may not suit your personal circumstances.
Marsh Pty Ltd (ABN 86 004 651 512, AFSL 238 983) (“Marsh”) and Marsh Advantage Insurance Pty Ltd (ABN 31 081 358 303, AFSL 238 369) (“MAI”) arrange the general insurance (i.e. not the Discretionary Trust Arrangement) and are not the insurer.
Discretionary Trust Arrangements are issued by the Trustee, JLT Group Services Pty Ltd (ABN 26 004 485 214, AFSL 417 964) (“JGS”). Any advice or dealing in relation to a Discretionary Trust Arrangement is provided by JLT Risk Solutions Pty Ltd (ABN 69 009 098 864, AFSL 226 827) (“JLT”). The cover provided by a Discretionary Trust Arrangement is subject to the Trustee’s discretion and/or the relevant policy terms, conditions and exclusions.
For full details of the terms, conditions and limitations of the covers and before making any decision about whether to acquire a product, refer to the specific policy wordings and/or Product Disclosure Statements (PDSs) available from the relevant product issuer. Target Market Determinations (TMDs) are available here.
Marsh, MAI, JGS and JLT are all businesses of the Marsh group.
This publication is not intended to be taken as advice regarding any individual situation and should not be relied upon as such. The information contained herein is based on sources we believe reliable, but we make no representation or warranty as to its accuracy. Marsh shall have no obligation to update this publication and shall have no liability to you or any other party arising out of this publication or any matter contained herein. Any statements concerning actuarial, tax, accounting, or legal matters are based solely on our experience as insurance brokers and risk consultants and are not to be relied upon as actuarial, accounting, tax, or legal advice, for which you should consult your own professional advisors. Any modelling, analytics, or projections are subject to inherent uncertainty, and any analysis could be materially affected if any underlying assumptions, conditions, information, or factors are inaccurate or incomplete or should change.
LCPA 26/3912