A braided flexi hose is a flexible plumbing connection used around fixtures such as taps, mixers and cisterns.
Braided flexi hoses are easy to miss. They are often tucked away under sinks, behind fixtures or inside cupboards.
If a hose deteriorates or fails, escaping water can spread beyond where the problem started. In a residential strata property, that can mean damage within a lot and to nearby parts of the building.
For owners, residents and strata managers, checking accessible hoses as part of regular maintenance can help identify signs of a problem early.
Braided flexi hoses are used in plumbing connections around fixtures such as taps, mixers and cisterns. Their condition and installation both matter.
A Defence Service Homes article about household water damage reported that 77 percent of people who experienced water damage were actually at home when the incident occurred. The figure relates to Australian homes generally, not residential strata properties specifically.
This is a useful reminder that a leak does not need to happen while a property is empty to cause damage.
There is not always one cause.
Western Australian Government technical guidance says braided flexible hoses may be adversely affected by high or fluctuating pressures such as water hammer.
Installation can matter too. A hose that appears stretched, kinked, deteriorated, twisted or damaged should not simply be ignored.
You do not need to wait for water to appear on the floor before checking an accessible flexi hose. When you are looking at a hose, pay attention to:
If you are unsure about the condition of a hose, speak with a licensed plumber.
Braided flexi hoses should be installed in line with the plumbing requirements that apply in the relevant state or territory and the manufacturer's instructions.
For strata managers and owners, maintenance is not only about spotting a leak. It is also worth considering whether a hose is accessible, correctly fitted and showing signs that it needs attention.
A burst flexi hose can raise two separate questions: what caused the hose to fail, and what property was damaged as a result.
Strata insurance typically covers the building, common property, and common area contents in the event of sudden/unforeseen accidental loss or damage. Each policy has its own terms, conditions and exclusions. Check the applicable policy wording and Product Disclosure Statement to understand how a particular event may be treated.
Committees should be conscious of frequency burst flex-hose claims and consider a committee led maintenance program to check and replace all flexi hoses for best insurer outcomes. When a property suffers multiple claims from a flexi hose event, this can demonstrate gradual deterioration requiring attention in multiple lots, before another loss is incurred.
Responsibility is not the same in every situation. It can depend on where the hose is located, what it services and the strata arrangements that apply to the property. For example, in NSW plumbing in internal walls and fixtures (such as baths, toilets, sinks and showers) are the responsibility of the owners. Whereas plumbing in boundary walls and under the floor are under the owners corporation.
If responsibility is unclear, check the strata plan and by-laws and speak with the strata manager or relevant professional.
Braided flexi hoses are a small part of a residential strata property's plumbing, but they are worth including in regular maintenance checks. Knowing where accessible hoses are and dealing with visible signs of deterioration early can help reduce the chance of an unexpected water leak.
A braided flexi hose is a flexible plumbing connection used around fixtures such as taps, mixers and cisterns.
There can be more than one factor. The condition of the hose, how it was installed and water pressure can all be relevant.
Look for moisture, visible deterioration or corrosion. Also pay attention to hoses that appear stretched, kinked or twisted. If you are unsure, ask a licensed plumber to check the hose.
Follow the manufacturer's instructions for the particular hose. If its age or condition is unclear, consider asking a licensed plumber to assess it rather than relying on a general replacement timeframe.
If a hose leaks or fails, escaping water can affect the area around it. What happens next will depend on where the hose is located and the circumstances of the incident.
The answer depends on the policy and the circumstances. Strata insurance and the treatment of the failed hose itself should not be assumed to be the same thing.
Not necessarily. Policy exclusions may be relevant, including exclusions relating to wear and tear, corrosion, defects or maintenance. Check the applicable policy wording.
NSW Government guidance distinguishes between plumbing within an owner's property and plumbing forming part of common property. The location of the plumbing is therefore important when considering responsibility.
WA Government technical guidance specifically addresses braided flexible hoses, including installation requirements and the potential effect of high or fluctuating water pressure.
Plumbing requirements vary by location and the type of work involved. Speak with a licensed plumber about the work required for your property.
If it is safe to do so, stop the water supply to help limit further escaping water. Arrange a plumber and tell the strata manager where relevant. Contact the appropriate insurer or broker about any resulting damage.
Accessible flexi hoses are worth including when checking for plumbing maintenance issues. Looking for visible deterioration or moisture can help identify a potential problem before it becomes more serious.
This website contains general information, does not take into account your individual objectives, financial situation or needs and may not suit your personal circumstances.
Marsh Pty Ltd (ABN 86 004 651 512, AFSL 238 983) (“Marsh”) and Marsh Advantage Insurance Pty Ltd (ABN 31 081 358 303, AFSL 238 369) (“MAI”) arrange the general insurance (i.e. not the Discretionary Trust Arrangement) and are not the insurer.
Discretionary Trust Arrangements are issued by the Trustee, JLT Group Services Pty Ltd (ABN 26 004 485 214, AFSL 417 964) (“JGS”). Any advice or dealing in relation to a Discretionary Trust Arrangement is provided by JLT Risk Solutions Pty Ltd (ABN 69 009 098 864, AFSL 226 827) (“JLT”). The cover provided by a Discretionary Trust Arrangement is subject to the Trustee’s discretion and/or the relevant policy terms, conditions and exclusions.
For full details of the terms, conditions and limitations of the covers and before making any decision about whether to acquire a product, refer to the specific policy wordings and/or Product Disclosure Statements (PDSs) available from the relevant product issuer. Target Market Determinations (TMDs) are available here.
Marsh, MAI, JGS and JLT are all businesses of the Marsh group.
This publication is not intended to be taken as advice regarding any individual situation and should not be relied upon as such. The information contained herein is based on sources we believe reliable, but we make no representation or warranty as to its accuracy. Marsh shall have no obligation to update this publication and shall have no liability to you or any other party arising out of this publication or any matter contained herein. Any statements concerning actuarial, tax, accounting, or legal matters are based solely on our experience as insurance brokers and risk consultants and are not to be relied upon as actuarial, accounting, tax, or legal advice, for which you should consult your own professional advisors. Any modelling, analytics, or projections are subject to inherent uncertainty, and any analysis could be materially affected if any underlying assumptions, conditions, information, or factors are inaccurate or incomplete or should change.
LCPA 26/3916